Ricoh Savin en5100WD Operating Instructions Manual page 123

Specifying the first printing page and start number ("P1,P2...", "-1-,-2-...", "P.1,P.
2... ", "1,2... ")
Explains the example when "P1, P2 ..." is selected. The steps are the same for other cases.
1. Press [Edit / Stamp].
2. Press [Stamp].
3. Press [Page Numbering].
4. Press [Change] under Change Numbering.
5. Press [First Printing Page], enter the original sheet number from which to start printing
with the number keys, and then press [ ].
6. Press [First Printing Number], enter the number of page from which to start numbering
with the number keys, and then press [ ].
The example below shows when the first printing page is "2" and the start number is "3".
7. Press [Last Number], enter the number of the page at which to stop numbering with the
number keys, and then press [ ].
If you want to number all pages to the end, press [to the End].
8. When page designation is complete, press [OK].
9. Press [OK] twice.
• To change the numbers entered in steps 5 - 7, press [Clear], and then enter a new number.
BAS080S
Stamps
121