Ricoh Savin en5100WD Operating Instructions Manual page 129

• You cannot use the bypass tray with this function.
To specify the area you want to erase, you have to define the value of X1, Y1, X2, and Y2 on the
original. Measure the area you want to specify before entering the area settings.
X1, X2: 0 - 432 mm (0 - 17 inches)
Y1, Y2: 0 - 432 mm (0 - 17 inches)
1. Press [Edit / Stamp].
2. Press [Erase].
3. Select one of the areas from [Erase Inside 1] to [Erase Inside 5].
BAT091S
BAT092S
Advanced Copier Functions
127