Preset Stamp - Ricoh Savin en5100WD Operating Instructions Manual

4. Enter the number to start counting from with the number keys, and then press [ ].
You can enter a number between 1 and 9999.
5. Press [OK] twice.
• To change the value entered in step 4, press [Clear] to set a new value.
• You can combine this function with up to four other stamp functions.

Preset Stamp

Messages are stamped on copies.
• You cannot use the bypass tray with this function.
• Only one message can be stamped at a time.
The following eight messages are available for Preset Stamp:
"COPY", "URGENT", "PRIORITY", "For Your Info.", "PRELIMINARY", "For Internal Use Only",
"CONFIDENTIAL", "DRAFT"
Stamp position and original orientation
The stamp positions differ according to the orientation in which you place the originals.
BAT071S
Stamps
107