Mirror Image - Ricoh Savin en5100WD Operating Instructions Manual

2. Press [Edit Image].
3. Press [Partial Copy].
4. Press [Y1], and then enter the scan start position (the length from the leading edge of the
original) with the number keys.
5. Press [ ].
6. Press [Y2], and then enter the copy size with the number keys.
7. Press [ ].
8. Press [OK] twice.
• To change the value, press [Clear], and then enter a new value.
• The copy size (Y2) should be at least 210 mm (8.3").
• On the Type 1, the maximum copy length (Y1 Y2) is 15,000 mm (590.5").
• On the Type 2, the maximum copy length (Y1 Y2) is 30,000 mm (1181.1").
• On the Type 1, if Y1 Y2 is greater than 15,000 mm (590.5"), the machine shortens Y2 to make
Y1 Y2 less than the maximum.
• On the Type 2, if Y1 Y2 is greater than 30,000 mm (1181.1"), the machine shortens Y2 to make
Y1 Y2 less than the maximum.
• For Y2, specify the actual length that you require.

Mirror Image

Copies by reversing the image from left to right, as reflected in a mirror.
Advanced Copier Functions
135