2. Basic Copying
Changing the number of sets
You can change the number of copy sets during copying.
• This function can only be used when the Sort function is selected.
1.
While "Copying..." is displayed, press the [Clear/Stop] key.
2.
Press [Change Quantity].
3.
Enter the number of copy sets with the number keys, and then press the [ ] key.
4.
Press [Continue].
Copying starts again.
• The number of sets you can enter in step 3 differs depending on when the [Clear/Stop] key is
pressed.
Fold
The fold function is optional.
Automatically folds copies after they are printed.
• If you select Fan Fold, you must select the rear copy output as the copy output location.
• For details about the Fold function, see the manuals for your folding finisher.
• Actual results might differ from the illustration. Depending on sheet length, fold widths will vary for
each panel.
Fan Fold
The sheet is folded several times parallel to its leading edge, enabling it be opened like a fan.
80