Routing - Avaya 3.7 Configuration Manual

Using Device tabs to configure the security gateway
Select a network object and click Add to configure additional IP addresses and mask.
Figure 25: Device Network Objects tab

Routing

Routing is specified when more than one router exists on a network to which the security
gateway must forward either VPN or non-VPN traffic.
The Routing tab shows the VPN traffic default routes, including the IP address of the hop and
the IP address of the network mask pairs for this hop. You can add, modify, and delete routes.
Figure 26: The routing tab for a security gateway object
The IP Address Next Hop is a list that displays the IP address of the next hop routers (from the
security gateway in focus).
Issue 4 May 2005 81