Avaya 3.7 Configuration Manual page 257

Table 22: ipRouteTable Parameters (continued)
Parameter Description
Metric 5 An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.
Route Info A reference to MIB definitions specific to the
particular routing protocol which is responsible
for this route, as determined by the value
specified in the route's ipRouteProto value. If
this information is not present, its value should
be set to the OBJECT IDENTIFIER { 0 0 },
which is a syntactically valid object identifier,
and any conformant implementation of ASN.1
and BER must be able to generate and
recognize this value.
Table 23: FilterStats Parameters
Parameter Description
FilterStatsName Interface name to which the filtering stats
apply.
Pass In Number of inbound packets allowed to pass
through this interface.
Pass Out Number of outbound packets allowed to pass
through this interface.
Block In Number of inbound packets not allowed to
pass through this interface.
Block Out Number of outbound packets not allowed to
pass through this interface.
No Match In Number of inbound packets that did not match
any rule. This count includes all
non-rule-matching packets, regardless of
whether the packets were ultimately passed or
blocked per the default rule.
Using Monitor
4 of 4
1 of 7
Issue 4 May 2005 257