Table of Contents
Advertisement
Configuring remote access users
Using local authentication
If the security gateway uses authenticating remote users for CCD, deliver the following pairs to
the respective users.
NAME: The name created in Step 2.
PASSWORD: The password created in Step
Using RADIUS authentication (VPNos 3.X and VPNos 4.31)
If a RADIUS server is used for authenticating remote users for CCD, deliver the following pairs
to the respective users.
NAME: The name created in Step
PASSWORD: The password stored in the user's record of the RADIUS server.
Using LDAP authentication (VPnos 3.X only)
If the directory server is used authenticating remote users for CCD, deliver the following pairs to
the respective users.
NAME: The name created in Step 2.
PASSWORD: The password created in Step
Using Policy Manager for user configuration
From the VPNmanager Policy Manager property, you can configure the client IP address pool
for the remote users and define to users when they log on. (VPNos 3.x and VPNos 4.31 only)
You can configure the RADIUS/ACE services.
Client IP address pool configuration
Access control devices (ACD), such as firewalls, guard the networks from unauthorized users.
Analyzing source addresses is one method ACDs use to decide which packets can enter the
network. ACD is a problem for VPNremote Client users. The addresses which ISPs dynamically
assign to VPNremote Clients is naturally blocked because it is impossible to know ahead of time
which address is assigned. The security gateway solves this problem by using Client IP
Address Pools.
120 Avaya VPNmanager Configuration Guide Release 3.7
3
2
2
Advertisement
Table of Contents
