Configuring A Global Dyna-Policy; Dyna-Policy Defaults (User) Tab - Avaya 3.7 Configuration Manual

Configuring a global dyna-policy

You configure the global CCD from the Preferences property sheet. You should set up the
default global CCD before you configure user objects. The parameters can be changed any
time.
You configure the following Preferences property tabs to create a global dyna-policy:
Dyna-Policy Defaults (User)
Dyna-Policy Defaults (Global)
Dyna-Policy Authentication
Remote Client
The following describes each of the tabs. For the procedure to configure a default CCD see
Configure a default CCD with global dyna-policy

Dyna-Policy Defaults (User) tab

The Preferences Dyna-Policy Defaults (User) tab is used to define how the remote user's
computer handles the dyna-policy configuration data (VPN session parameters).
Figure 33: Preferences, Dyna-Policy Defaults (User) tab
Configuring a global dyna-policy
on page 113.
Issue 4 May 2005 107