Add Ip Group Member - Avaya 3.7 Configuration Manual

Configuring IP Groups
IKE Identifier. - Extranet security gateway using IKE key management can be based on the
following IKE Identifier types:
IP Address
DNS Name
Directory Name
Email Name
When one of the above is selected, an appropriate field appears in which the information is
entered.

Add IP Group member

The Add IP Group Member dialog appears when Add is clicked. New member can be added to
the current IP Group list.
Depending on the release of VPNos, two options are available in this pane: IP Network address
and Mask, or IP Range. For the IP Range, enter the starting and ending IP addresses.
Table 8: Deriving the Group Mask
To specify a
contiguous range of
this many addresses:
1
2
4
8
16
32
64
100 Avaya VPNmanager Configuration Guide Release 3.7
Start from an IP address that meets
these specifications:
###.###.###.### (any IP address)
###.###.###.n (n = multiple of 2); e.g.,
130.57.4.2 or 130.57.4.4
###.###.###.n (n = multiple of 4); e.g.,
130.57.4.4 or 130.57.4.8
###.###.###.n (n = multiple of 8); e.g.,
130.57.4.8 or 130.57.4.16
###.###.###.n (n = multiple of 16); e.g.,
130.57.4.16 or 130.57.4.32
###.###.###.n (n = multiple of 32); e.g.,
130.57.4.32 or 130.57.4.64
###.###.###.n (n = multiple of 64); e.g.,
130.57.4.64 or 130.57.4.128
And use this mask:
255.255.255.255
255.255.255.254
255.255.255.252
255.255.255.248
255.255.255.240
255.255.255.224
255.255.255.192
1 of 2