Table of Contents
Advertisement
Re-setup Device
Allows a complete re-setup of the security gateway. This is normally done when the security
gateway created did not exist in the network, or when the security gateway has been replaced
with a new unit.
Import Device Configuration
You can use the Import Device Configuration feature in VPNmanager to import configuration
data from security gateways running VPNos 4.31, for use in VPNmanager.
While it is feasible to configure a small number of security gateways using the VPNos Web
interface or the security gateway's CLI, it quickly becomes impractical for larger installations.
When switching to VPNmanager for centralized management of devices which have already
been configured, the Import Device Configuration feature allows the devices' existing
configuration data to be easily migrated to VPNmanager.
When a device configuration is imported into VPNmanager, only the device-level configuration
settings are imported. The domain-level settings, e.g. VPNs, Firewall templates, Users and
Failover are not imported. The configuration settings that are imported apply only to the
specified device.
Note:
If VPNmanager already has any configuration data for a particular device, the
Note:
retrieved data overwrites the existing data for that device.
In VPNmanager 3.4, the Import Device Configuration feature supports importing of the following
configuration settings:
Interfaces
Static Routes
Network Objects
Services
VoIP
DNS
NAT
NAT Traversal
DoS
SSH/Telnet
Management Access
Using the Device Actions tab
Issue 4 May 2005
281
Advertisement
Table of Contents
