Menu 2.3 Flow Trend; Menu 2.4 Module Information - Siemens SIWAREX WT241 Manual

Scale parameters and functions of the belt scale

8.11 Menu 2.3 Flow trend

Weight
Drag indicator (belt load)
Nominal belt load
Current zero offset
Current zero offset (%)
No. of zero settings
8.11 Menu 2.3 Flow trend
The flow trend is a graphical presentation of the flow rate. The graph will be scaled
automatically based on the given values.
8.12

Menu 2.4 Module information

2.4.1 Modul information
Order number
Serial number
Version
Version HMI-project
Support hotline
Support e-mail
76
The current material weight of the loaded belt resting on the
scale. The output is made in the selected weight unit from the
belt load.
Maximum measured belt load
The nominal belt load is entered during initial commissioning. It
is the basis for generating limits, and is calculated from design
flow rate / design speed.
Current difference compared to original zero (under load)
Current difference compared to original zero (% of nominal belt
load)
Number of zero settings, combines manual and automatic zero
settings. Will be reset with restoring the default values.
General information about the SIWAREX WT241
Order number of the weighing module used in the terminal.
Serial number of the weighing module used in the terminal.
Version of hardware and software
Version of the user interface software
Call this number to get technical support by telephone:
+49 721 595 2811
Technical support regarding SIWAREX products per e-mail:
hotline.siwarex@siemens.com
SIWAREX WT241
Manual, 05/2015, A5E36046748A