Commissioning Via Quick Start Routine - Siemens SIWAREX WT241 Manual

Commissioning

7.3 Commissioning via Quick Start routine

7.3 Commissioning via Quick Start routine
The SIWAREX WT241 offers a setup menu to carry out the commissioning of the scale.
Select item "1.0 Setup" in the main menu. The system is guiding you through the most
important parameters for starting-up the scale. The remaining parameters are factory-set in
such a way that they can be used in most cases without any changes.
Figure 7-1
In the next step, select the item "1.1 Basic parameters" and then press the "Switch on
service mode" button in the screen which subsequently appears. The square in the top right
corner is then colored yellow (= Service mode ON). You can subsequently use the button
with triangle at the bottom right to reach the submenu "1.1.1 Basic parameters 1 of 2".
Figure 7-2
44
Main menu
Basic parameters 1 of 2
SIWAREX WT241
Manual, 05/2015, A5E36046748A