Siemens SIWAREX WT241 Manual page 14

Safety notes
2.1 General safety instructions
Note
The specifications of the manual for the SIMATIC S7-1200 system apply for configuration,
installation and commissioning in the SIMATIC environment. This chapter includes additional
information on hardware configuration, installation and preparation for operation of the
SIWAREX WT241.
The safety notes must be observed.
Note
The device was developed, manufactured, tested and documented in compliance with the
relevant safety standards. The device does usually not pose any risks of material damage or
personal injury.
Siemens provides automation and drive products with industrial security functions that
support the secure operation of plants or machines. They are an important component in a
holistic industrial security concept. With this in mind, our products undergo continuous
development. We therefore recommend that you keep yourself informed with respect to our
product updates. Detailed technical information can be found at:
http://support.automation.siemens.com (http://www.siemens.de/automation/csi_en_WW).
To ensure the secure operation of a plant or machine it is also necessary to
take suitable preventive action (e.g. cell protection concept) and to integrate
the automation and drive components into a state-of-the-art holistic industrial
security concept for the entire plant or machine. Products used from other
manufacturers should also be taken into account here. You will find further
information under: http://www.siemens.com/industrialsecurity
(http://www.siemens.com/industrialsecurity).
14
SIWAREX WT241
Manual, 05/2015, A5E36046748A