Section 6-Arms; Removing/Installing/Adjusting The Armrest - Invacare Concept 45 User Manual

6 Arms
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise
injury or damage may occur.
6.1

Removing/Installing/Adjusting the Armrest

Removing
1. Pull the armrest release pin to unlock the armrest.
2. Lifting up, remove the armrest from the armrest sockets.
3. Repeat STEPS 1-2 for other armrest.
Installing
1. Insert the armrest assembly in to the armrest sockets.
2. Lift the armrest up to ensure the armrest release pin is engaged and
locking the front armrest tube into the front armrest socket.
3. Repeat STEPS 1-2 for other armrest.
Adjusting Armrest Height
1. Pull the armrest adjustment pin to unlock the armrest.
2. Adjust armrest to desired height.
3. Release the armrest adjustment pin to lock the armrest at the
desired height.
4. Repeat STEPS 1-3 for other armrest.
Part No. 1088191
Armrest
Front Armrest
Tube
Armrest
Socket
(Front)
(Pull to Unlock Armrest)
FIGURE 1 Removing/Installing/Adjusting the Armrest
37
Armrest Adjustment Pin
Armrest Release Pin
®
Invacare Concept 45 Wheelchair
6 ARMS
Armrest
Socket