Invacare Concept 45 User Manual page 51

Adjusting the Anti-Tippers
 A 1 to 2 inch clearance between the bottom of
-1/2
the anti-tipper wheels and the ground/floor MUST
be maintained at all times.
1. Place the wheelchair on a flat surface.
2. Remove locking screw securing the wheeled portion of the
anti-tipper to the anti-tipper tube.
3. Slide the wheeled portion of the anti-tipper up/down to achieve the
1-1/2 to 2-inch clearance (Detail "A").
4. Using the locking screw, secure the wheeled portion of the
anti-tipper to the anti-tipper tube.
5. Repeat STEPS 2-4 to adjust the remaining anti-tipper.
6. Ensure both anti-tippers are adjusted to the same height.
Part No. 1088191
Anti-tipper Wheeled Portion
Locking Screw
FIGURE 2
51
10 ANTI-TIPPERS/WHEEL LOCKS
DETAIL "A"
1-1/2 to 2 inch
Clearance
Anti-tipper
Tube
Adjusting the Anti-Tippers
®
Invacare Concept 45 Wheelchair