Back Angle Adjustments - Invacare Concept 45 User Manual

7.2

Back Angle Adjustments

The necessary back angle MUST be selected

BEFORE repositioning the rear wheels forward
and adjusting the limit stops. Invacare DOES NOT
recommend adjusting the back angle after the rear
wheels have been repositioned forward. If the rear
wheels have been adjusted forward before the
necessary back angle has been achieved, the limit
stop on the gas cylinder MUST be adjusted.
1. Loosen the locking screws that secure the back cane to the seat
adjustment plates on both sides of the wheelchair.
2. Reposition cane into one (1) of the five (5) mounting holes on the
seat adjustment plates to obtain 90°, 95°, 100°, 105° or 110°.
3. Tighten the four locking screws.
Part No. 1088191
Mounting Holes
Seat
Adjustment
Plates
Locking Screws
FIGURE 2
39
7 SEAT AND BACK
Back Cane
90°
110°
Wheelchair
Frame
Back Angle Adjustments
®
Invacare Concept 45 Wheelchair