Invacare Concept 45 User Manual page 44

8 REAR WHEELS
6. Reinstall the rear wheels onto the wheelchair. Refer to Removing/Installing Rear Wheels on page 41.
 When adjusting the rear wheel location, inspect and if necessary adjust the following items to ensure proper wheelchair
operation and stability: limit stops, tilt-in-space, back angle and wheel locks.
7. Engage the tilt-in-space and test the wheelchair for stability. Refer to Engaging the Tilt-in-Space System on page 40.
8. Repeat the above procedures until the wheelchair is stable.
9. Adjust the wheel locks. Refer to Adjusting Patient Operated Wheel Locks on page 53.
®
Invacare Concept 45 Wheelchair
Adjusts Backward
Axle Mounting Bracket
Bolt
Wheelchair Frame
FIGURE 2 Repositioning The Rear Wheels
Adjusts Forward
Locknut
Washers
44
Part No. 1088191