9 FRONT CASTERS
9.3
Replacing Front Casters
WARNING
Make sure both front casters are the same size
and are installed into the same respective
mounting hole before using the wheelchair,
otherwise injury may occur.
If replacing the same size front caster, note the
mounting position on the fork assembly for
proper reinstallation of the new front caster.
1.
Remove the hex screw, locknut and the two washers and spacers
that secure the front caster to the fork.
2.
To reinstall the new front caster onto the fork, reverse STEP 1.
®
Invacare
Concept 45 Wheelchair
6 or 8 inch Fork
Hex
Screw
Spacer
FIGURE 2
48
Locknut
Washer
Front Caster
Washer
Replacing Front Casters
Part No. 1088191
Spacer