Invacare Concept 45 User Manual page 12

2 SAFETY
Tilt-in Space
WARNING
ALWAYS make sure that the chair is stable BEFORE using the tilt-in -space. Rear wheels may have to be repositioned
rearward depending on the degree of tilt-in-space required. ALWAYS ensure stability BEFORE using maximum amount of
tilt-in-space (45° for 15-19-inch seat depths) TEST chair BEFORE it is occupied by the end user to ensure safety.
The necessary back angle (90°, 95°, 100°, 105°, 110°) MUST be selected BEFORE repositioning the rear wheels forward
and adjusting the limit stops.
The gas cylinder MUST be operational before using the chair. DO NOT operate the tilt-in space if the gas cylinder is not
operational.
DO NOT operate the tilt-in-space if the trigger release lever and cable is not properly adjusted to ensure the gas cylinder
locks in place when being engaged.
®
Invacare Concept 45 Wheelchair
12
Part No. 1088191