Troubleshooting - Invacare Concept 45 User Manual

❑ Ensure arm rests are securely install, but are easy to release and remove from the wheelchair.
❑ Inspect arms for rips in upholstery.
❑ Inspect seat and backs for rips and sagging.
❑ Check that there is no excessive side movement or binding in the rear wheels when lifted and spun.
❑ Inspect handrims for signs of rough edges or peeling.
❑
Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Inspect casters for cracks and wear.
❑
Clean upholstery and armrests with mild soap and water.
❑ Check that all labels are present and legible. Replace if necessary.
❑ Inspect the gas cylinders for leaking oil. Replace if necessary.
❑ Inspect the trigger release lever and cable to ensure proper release and engage the tilt-in-space lock.
4.2

Troubleshooting

CHAIR VEERS SLUGGISH TURN
RIGHT/LEFT OR PERFORMANCE
X
X
Part No. 1088191
CASTERS
FLUTTER
X
X X
X
4 SAFETY INSPECTION/TROUBLESHOOTING
SQUEAKS AND LOOSENESS
RATTLES IN CHAIR
X
31
SOLUTIONS
Check tires for correct and equal
pressure
X Check for loose nuts and bolts.
Check that both casters contact
ground at the same time.
®
Invacare Concept 45 Wheelchair