Table of Contents
Advertisement
Page 36 - Ringer Controls
Setting a Ringer Step
Setting the Ringer Timeout
Page 36 - Ringer Controls
Setting a Ringer Step
If a call rings unanswered, the phone can increase the volume on each ring until it
reaches its maximum. You can select several sizes of increase step.
To set the ringer volume step size:
1. Press PROGRAM and then RINGER.
2. Enter your passcode (see page 40).
3. Select from: OWN or GROUPS .
4. Press STEPS.
The display shows the current setting;
LARGE STEP, SMALL STEP or NO STEP (no increase).
5. To select another step size, press CHANGE.
6. Press DONE and PROGRAM to finish.
The ringer timeout control several actions.
• Callback:
How long a callback rings you before cancelling.
• Group hunting:
How long calls to a group of which your phone is a member, rings your phone
before trying the next member.
• Divert on no answer:
How long calls ring at your phone before the system uses Divert on No Answer if
set.
To set the ringer timeout:
1. Press PROGRAM and then RINGER.
2. Enter your passcode (see page 40).
3. Select from either OWN or GROUPS .
4. Press TIMEOUT. The display shows the current setting.
5. Press CANCEL and enter the new timeout in seconds. The normal value of 10
seconds is equal to 3 rings.
6. Press DONE and PROGRAM to finish.
Setting a Ringer Step
INDeX 10.0 2030/50/60 User's Guide
38DHB0002UKFN Issue 2 (07/2002)
Advertisement
Table of Contents
