Table of Contents
Advertisement
Changing the Ringer Volume
Ringer Controls
Changing the Ringer Volume
Changing the Ringer Sound
Switching the Ringer On/Off
INDeX 10.0 2030/50/60 User's Guide
38DHB0002UKFN Issue 2 (07/2002)
You can change for your OWN phone and, if in a group, the Group ringer's:
Volume (including the Steps in which the volume increases).
-
Sound of the ringer to your own distinctive ring.
-
Timeout period before a callback call can ring before being cancelled,
-
the period in which your group phone rings before trying the next number
and/or the time your phone rings before the system uses a divert.
In addition, for incoming Internal and External calls, you can turn the ringer off.
While altering the volume, the phone rings.
To change the ringer volume:
1. Press PROGRAM and then RINGER.
2. Enter your passcode (see page 40).
3. Select from either OWN or GROUPS .
4. Press VOLUME. The display shows a slider. Adjust this using the -keys on its
left (softer) or right (louder).
5. Press DONE and PROGRAM to finish.
The ringer volume for all incoming calls is now changed.
The ringer sound contains three tones. You can adjust the 'mix' of these to achieve
your own distinctive ring. While doing this the phone rings.
To change the ringer sound:
1. Press PROGRAM and then RINGER.
2. Enter your passcode (see page 40).
3. Select from: OWN or GROUPS .
4. Press SOUND. The display shows a slider. Adjust this using the -keys on its
left and right.
5. To select another part of the sound to adjust, press TONE. This changes the
slider to a different tone.
6. Press DONE and PROGRAM to finish.
You can switch the ringer on or off for internal and/or external calls. This does not
affect the information displayed.
For internal calls you can also select AUTO ANSWER to connect internal calls after
giving just a single tone. This feature is sometimes called "Splash calls". A similar
feature can also be enabled for external calls (see "Automatic External Call
Connection" on page 19).
To switch the internal or external ring on/off:
1. Press PROGRAM and then RINGER.
2. Enter your passcode (see page 40).
3. Select either EXTERNAL or INTERNAL.
The display shows the current setting.
4. To change the ringer mode, press CHANGE to select ON, OFF or AUTO
ANSWER (internal only).
5. Press DONE and PROGRAM to finish.
Ringer Controls – Page 35
Ringer Controls – Page 35
Changing the Ringer Volume
Advertisement
Table of Contents
