Table of Contents
Advertisement
Page 40 - Phone Settings
Phone Settings
The Phone Passcode
Background Music
Page 40 - Phone Settings
The Phone Passcode
If the phone displays ENTER PASSCODE, it expects you to dial your passcode. The
default passcode is 0000.
Wrong passcode entry can result in the phone becoming barred. Barred phones
cannot access features requiring passcode entry. They can make external calls but
only to special numbers, e.g. Emergency numbers.
To enter your passcode:
1. Dial your passcode. If you make a mistake, press CANCEL and restart entry.
2. If you enter the wrong number, the phone displays REENTER. Enter the
passcode again or press PROGRAM to end programming.
3. If you enter the wrong passcode 5 times, the phone displays THIS TERMINAL IS
BARRED. To unbar your phone contact the System Manager.
To change your passcode:
1. Press PROGRAM and then SCROLL twice. Press PASS.
2. Enter the current passcode.
3. The display shows ENTER NEW CODE. Enter the new passcode (all passcodes
must be at least four digits).
• To restart after a mistake, press CANCEL.
If your system has external Music-on-Hold installed, you may be able to have it play
when the phone is not in use. The phone's speaker volume controls the loudness of
the music (see page 16).
To switch background music on/off:
1. Press PROGRAM and then SCROLL. Press MUSIC.
2. Enter your passcode (see page 40).
3. The display shows the NO MUSIC or BACKGROUND MUSIC.
4. To change the current setting press CHANGE.
5. Press DONE and then press PROGRAM to finish.
The Phone Passcode
INDeX 10.0 2030/50/60 User's Guide
38DHB0002UKFN Issue 2 (07/2002)
Advertisement
Table of Contents
