Table of Contents
Advertisement
Adding Voluntary Account Codes
Adding Voluntary Account Codes
Software Release
Muting Calls
Recall
INDeX 10.0 2030/50/60 User's Guide
38DHB0002UKFN Issue 2 (07/2002)
You can enter an account code during any external call. If the system records the
call on its call log, it includes the account code. The system checks the code against
its list of valid codes (ask your System Manager for a copy).
To enter a voluntary account code:
1.
During the call, press ACCOUNT.
2.
Enter an account code. If you make a mistake, press DELETE to delete the
last digit entered.
3.
When you have entered the full code, press DONE.
4.
If the system does not recognise the code, the phone displays RE-ENTER
ACCOUNT.
Occasionally you may need to talk to someone for support about your phone or
phone system. It may be useful to tell that person what software your phone system
uses.
To display the software release:
1. During a call, press PROGRAM, the phone displays the software installed on
your system. To do this without making a call, just press ANSWER/RELEASE
first.
2. Press SCROLL to return to the normal display.
You can stop the caller from hearing you if necessary. This feature works for both
handsfree and handset calls.
To switch mute on/off:
Press MUTE. The
-symbol disappears when muted.
Your phone system may connect to another phone system by a fixed line (tie line). If
this is the case, you may occasionally need to use a 'recall' (your System Manager
will advise). To do this, RECALL appears when necessary. You may also use
RECALL to switch from Dial Ahead to sending tones on incoming calls.
Actions During a Call – Page 17
Actions During a Call – Page 17
Adding Voluntary Account Codes
Advertisement
Table of Contents
