Replacing Compressor - Daikin 2MXM50M Service Manual

ESIE16-02B | Part 3. Repair

3.3.2.5. Replacing compressor

PRELIMINARY ACTIONS
1. Switch off the Daikin unit via the user interface.
2. Switch off the Daikin unit with the field supplied circuit breaker.
3. Recover the refrigerant, refer to
4. Remove plate work when required.
5. Remove any part that blocks the way to the compressor.
PROCEDURE
I
NFORMATION
Follow local regulations and Daikin refrigerant repair procedures during the repair of your unit, refer to
ant repair procedures" on page
C
AUTION
The maximum applied Nitrogen pressure must not exceed 0.02 MPa.
Removal
1. Remove the terminal cover (3) and unplug the compressor wiring (4) and take picture.
2. Using a pipe cutter, cut the compressor pipes (5) below the soldered joint.
3. Loosen and remove the 3 nuts (6) that fix the compressor (7).
4. Remove the compressor (7).
5. Remove the dampers (9) with bushings (10) from the compressor (7).
6. Recuperate the putty (8).
Page 76
RA R32 Split & multi split M-Series
"Recovery procedure" on page
53.
3.3. Unit specific repair procedures
53.
"Refriger-
4/04/17 | Version 1.1