Table of Contents
Advertisement
6.1.5 The four control elements (pushbuttons) of the control panel
6.1.5.1 The Browser Button
Stop to press the Browser Button, if you've reached the preferred submenu, displayed on the
Screen/Menu display. The first menu entry of the selected submenu will be displayed as default.
6.1.5.2 The ENTER Button
ENT
6.1.5.3 The Navigate Up Button
6.1.5.4 The Navigate Down Button
ENDURANCE 1R
info@Raytek-Direct.ca
The Browser Button serves as a selector for one of the 5 integrated submenus. The
specific submenu selection can be done in the following ways:
Pressing the Browser Button several times in series to toggle between the 5
•
submenus
Holding the Browser Button pressed, toggles between the 5 submenus about
•
every 2 sec
The available submenus are:
•
•
•
•
•
The Enter Button confirms the selection of a submenu or a specific submenu entry.
After walking through the listed submenu entries by using the Navigate Buttons, the
selection done by the Enter Button initiates a blinking of the modifiable entry,
displayed in the 2nd row of the Screen/Menu display. To store updated entries a final
press of the Enter Button is needed. With the Enter Button you also walk through
multiple section entries, like network IP-addresses (4 subfields with a value range of
0-255).
The Navigate Up Button enables you to walk through the list of integrated entries per
submenu, increases marked numerical values or toggles the specific entry.
The Navigate Down Button enables you to walk through the list of integrated entries
per submenu, decreases marked numerical values or toggles the specific entry.
INFORMATION MENU
CONFIGURATION MENU
UNIT SETUP MENU
INTERFACE MENU
ANALOG MENU
Rev. E1 Sep 2015
Operation
31
1.800.868.7495
Advertisement
Table of Contents
