Table of Contents
Advertisement
Options
8 Options
Options are items that are factory installed and must be specified at time of order. The following are
available:
Laser Sighting
•
LED Sighting
•
Video Sighting
•
ISO Calibration Certificate, based on DAkkS (Deutsche Akkreditierungsstelle)
•
Air/Water-Cooled Housing
•
8.1 Laser Sighting
The laser sighting allows fast and precise aiming at small, rapidly moving targets, or targets passing at
irregular intervals. The laser is specially aligned with the sensor's lens to provide accurate, non-
parallax pinpointing of targets. The laser comes as a small, bright red spot indicating the center of the
area being measured.
The laser is a Class II, AlGaInP type laser with an output power less than 1 mW, and an output
wavelength of 650 nm. The laser complies with FDA Radiation Performance Standards, 21CFR,
subchapter J, and meets IEC 825, Class 2 specifications.
To preserve laser longevity, the laser automatically turns off after approximately
10 minutes of constant use!
W
!
ARNING
Avoid exposure to LASER light! Eye damage can result.
Use extreme caution when operating!
Never look direct into the LASER beam.
If LASER Sighting is activated, avoid looking through
the Visual Sighting Port of the Control Panel, because
mirror and dispersion effects can injure Eyes.
Never point directly at another person!
40
info@Raytek-Direct.ca
Figure 25: LASER Spot Size Indication
Rev. E1 Sep 2015
Laser dot
Measured spot at the inner of the circle
Spot marker
ENDURANCE 1R
1.800.868.7495
Advertisement
Table of Contents
