M12 4-Socket Lan/Ethernet Connector - Fluke Endurance 1RL Operating Instructions Manual

Installation

5.2.2 M12 4-Socket LAN/Ethernet Connector

The LAN/Ethernet connector on Endurance 1R side is a M12 4-socket connector type, D-coded, suited
for industrial Ethernet with IP67 protection rate and a screw retention feature. Via the LAN/Ethernet
connector the Endurance 1R device can also be powered as a PD (Powered Device) by a PSE (Power
Sourcing Equipment) in a PoE (Power over Ethernet) mode. In such operation mode a PoE injector or
a PoE switch is needed. Refer to PoE standard IEEE 802.3af, mode A, 10/100 Mbit mixed DC & data.
Figure 13: M12 Socket at the Endurance 1R (left) and the corresponding cable plug (right)
24
info@Raytek-Direct.ca
RJ45
PoE Injector/Switch
1
2
3
6
Figure 14: Ethernet Cable with M12 Plug and RJ45 Connector
Rev. E1 Sep 2015
Signal Pin RJ45 Pin M12-4
TD+
TD-
RD+
RD-
M12-4
Endurance Device
1
3
2
4
ENDURANCE 1R
1 1
2 3
3 2
6 4
1.800.868.7495