Accessories; Overview - Fluke Endurance 1RL Operating Instructions Manual

Accessories

9 Accessories

9.1 Overview

A full range of accessories for various applications and industrial environments are available.
Accessories include items that may be ordered at any time and added on-site. These include but are
not limited to the following:
Power Supply (24VDC, 110/220VAC input ) & Endurance Terminal Block mounted in a NEMA 4 (IP65)
E-PS
enclosure
PoE Injector provides power and also acts as a single Ethernet hub (110/220VAC input) includes 2M office
E-POE
grade Ethernet cable
E-SYSPS 24 VDC 1.2 A industrial power supply, DIN rail mount
E-TB Endurance terminal block accessory
E-TBN4 Endurance terminal block in a NEMA 4 enclosure
E-AP Air purge collar
E-PA
Pipe adapter (Sighting tubes listed below can be attached to this)
E-MN
Mounting nut (spare)
E-FB Fixed bracket (spare)
E-AB Adjustable bracket
E-SB Swivel bracket
E-RA Right angle mirror (for targets at right angles to sensor axis)
E-2CCON 12-pin DIN Cable connector
E-M5PK
M5 patch cable kit (To allow Endurance use with existing M5 cables)
E-M5WJAK Modline 5 WJA adapter kit to allow for use of ER sensors in WJA
E-UAA Endurance UAA (Universal Adapter Accessory)
E-AK-7 Adapter kit for mounting Endurance into existing WJ-5 water jacket installations
E-MF-7 Mounting flange
E-MFA-7 Flange adapter (to allow Endurance to mount to MF-7)
E-ECAP Replacement glass end-cap for Endurance sensors
E- PW
Protective front window (includes O-Ring)
E-PFEC Polarizing filter end cap (EN1R for reducing visual light in high temperature applications)
E-TJ1 ThermoJacket housing for Endurance sensors
E-TJ1M ThermoJacket housing for Endurance sensors Metric Version
E-MF Mounting Flange for ThermoJacket
E-MB Adjustable mounting base for ThermoJacket
E-GTQ Blast Gate Assembly with Quartz Window (HT model)
E-APA
Adjustable pipe adapter assembly
E-MST Mounting flange for use with sighting tubes
E-STC12 30 cm (12") sighting tube, ceramic up to 1500°C (2730°F)
E-ST12
30 cm (12") sighting tube, stainless steel up to 800°C (1470°F)
E-BEESIGHT 30 cm (12") sighting tube, carbon steel with 45 degree end cut and slotted weep hole at base
E-2CFT Focus adjustment tool, for use when Endurance sensors are installed in a Thermojacket.
E-WR Water flow regulator (water cooling)
E-AR Air purging flow regulator assembly with air filter
E-CAFR Cooling air flow regulator (high capacity)
E-USB485 USB to RS232/422/485 converter
44
info@Raytek-Direct.ca
Rev. E1 Sep 2015
ENDURANCE 1R
1.800.868.7495