Table of Contents
Advertisement
8.2 LED Sighting
The LED sighting allows fast and easy aiming at targets, which have to be centered in the
measurement spot. The LED is specially aligned with the sensor's lens to provide accurate, non-
parallax pinpointing of targets. The LED comes as a small, bright green spot, which indicates the
whole dimension of the measurement area.
W
ARNING
Avoid exposure to LED light! Eye damage can result.
Use extreme caution when operating! Never look direct into the LED beam.
If LED Sighting is activated, avoid looking through the Visual Sighting Port of
the Control Panel, because mirror and dispersion effects can injure Eyes.
8.3 Video Sighting
The Video Sighting capability is an option to display the focused target area on an external computer
monitor via LAN/Ethernet link. The video resolution and the refresh rate depends on the system
architecture (single or multidrop) and the available network bandwidth. It can be used for picture
capturing in different applications.
8.4 Air/Water Cooled Housing
The Air/Water Cooled Housing allows the sensor to be used in ambient temperatures up to 120°C
(250°F) with air cooling, and 175°C (350°F) with water cooling. The cooling media should be
connected using 1/8" NPT stainless steel fittings requiring 6 mm (0.24 in) inner diameter and 8 mm
(0.31 in) outer diameter for the tube.
ENDURANCE 1R
info@Raytek-Direct.ca
Figure 26: LED Spot Size Indication
To preserve LED longevity, the LED automatically turns off after approximately
10 minutes of constant use!
!
LED dot
Measured spot at the inner of the circle
Spot marker
Rev. E1 Sep 2015
Options
41
1.800.868.7495
Advertisement
Table of Contents
