Connecting The Headset (Optional); Connecting The Power (Optional) - Avaya 1220 User Manual

Installing your Avaya 1220 IP Deskphone

Connecting the headset (optional)

If you have a headset, you can connect the headset to the
Avaya 1220 IP Deskphone. For information on how to use your headset
with your IP Deskphone, see
1. Plug the headset cord into the headset jack on the back of the
IP Deskphone marked with the
Figure 4 on page 36
Avaya 1220 IP Deskphone.
2. Thread the cord through the channel in the side of the foot stand.
3. Set up the headset according to the headset instructions.
After you have the IP Deskphone working, you must configure the
headset using "Configuring a headset" on page

Connecting the power (optional)

Your Avaya 1220 IP Deskphone supports AC power and Power over
Ethernet (PoE). For AC power, use only the Avaya-approved Global
Power Supply (N0146475) and the country-specific IEC cable that you
can order separately. To use PoE, your connected LAN must support
PoE.
Note: Your IP Deskphone supports AC power and PoE options,
including IEEE 802.3 standard power. To use local AC power, you
can order separately the optional AC adapter. To use PoE, where
power is delivered over the CAT5 cable, the LAN must support PoE,
and you do not need an AC adapter.
38
"Using a headset" on page
)
symbol.
shows the connections on the back of the
CAUTION
Use your IP Deskphone with the approved
Avaya AC Adapter (model #N0089601).
96.
47.