Mld Proxying Configuration Example - HP MSR1002-4 Configuration Manual

(3001::1, FF3E::101)
RP: 1003::2
Protocol: pim-ssm, Flag:
UpTime: 00:13:25
Upstream interface: GigabitEthernet1/0/2
Upstream neighbor: 3002::1
RPF prime neighbor: 3002::1
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet1/0/1

MLD proxying configuration example

Network requirements
As shown in
•
IPv6 PIM-DM runs on the core network.
•
Host A and Host C on the stub network receive VOD information sent to IPv6 multicast group
FF3E::101.
Configure the MLD proxying feature on Router B so that Router B can maintain group memberships
and forward IPv6 multicast traffic without running IPv6 PIM-DM.
Figure 90 Network diagram
Proxy & Querier
Router B
GE1/0/2
3001::1/64
Receiver
Host A
Configuration procedure
1. Assign an IPv6 address and prefix length to each interface, as shown in
shown.)
2. Enable IPv6 multicast routing, IPv6 PIM-DM, MLD, and MLD proxying:
# On Router A, enable IPv6 multicast routing.
<RouterA> system-view
[RouterA] ipv6 multicast routing
[RouterA-mrib6] quit
# Enable IPv6 PIM-DM on GigabitEthernet 1/0/2.
[RouterA] interface gigabitethernet 1/0/2
[RouterA-GigabitEthernet1/0/2] ipv6 pim dm
Protocol: mld, UpTime: 00:13:25, Expires: -
Figure 90:
Querier
Router A
GE1/0/1
2001::1/64
GE1/0/1
2001::2/64
Host B
IPv6 PIM-DM
GE1/0/2
1001::1/64
Receiver
Host C
322
Figure 90. (Details not