Mld Proxying Configuration Example - HP VSR1000 Configuration Manual

Group address: FF3E::101
Last reporter: FE80::1
Uptime: 00:02:04
Expires: Off
# Display IPv6 PIM routing entries on Router D.
[RouterD] display ipv6 pim routing-table
Total 0 (*, G) entry; 2 (S, G) entry
(1001::1, FF3E::101)
RP: 1003::2
Protocol: pim-ssm, Flag:
UpTime: 00:13:25
Upstream interface: GigabitEthernet1/0/3
Upstream neighbor: 1003::1
RPF prime neighbor: 1003::1
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet1/0/1
(3001::1, FF3E::101)
RP: 1003::2
Protocol: pim-ssm, Flag:
UpTime: 00:13:25
Upstream interface: GigabitEthernet1/0/2
Upstream neighbor: 3002::1
RPF prime neighbor: 3002::1
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet1/0/1

MLD proxying configuration example

Network requirements
As shown in
•
IPv6 PIM-DM runs on the core network.
•
Host A and Host C on the stub network receive VOD information sent to IPv6 multicast group
FF3E::101.
Configure the MLD proxying feature on Router B so that Router B can maintain group memberships
and forward IPv6 multicast traffic without running IPv6 PIM-DM.
Protocol: mld, UpTime: 00:13:25, Expires: -
Protocol: mld, UpTime: 00:13:25, Expires: -
Figure 76:
250