T
S
ERMINAL
ETUP
VX 520 Setup
NOTE
Installing/Replacing
SIM Card (VX 520
GPRS Only)
30
VX 520 I
NSTALLATION
5
Install an MSAM card by carefully sliding it into the slot until it is fully inserted.
Figure 21
Installing a VX 520 D/E MSAM Card
Figure 22
Installing a VX 520 GPRS MSAM card
Before inserting the MSAM card, position it as shown in
gold contacts facing down. The cardholder connector base has an image
resembling the notched corner of an MSAM card to ensure the card is positioned
correctly.
6
Close the MSAM cardholder panel, and then replace the terminal rear cover.
The VX 520 GPRS terminal supports the installation of a SIM (Subscriber Identity
Module) card. Use the following procedure to replace or install a SIM card.
1
Place the terminal upside down on a soft, clean surface to protect the display
from scratches.
G
UIDE
Figure
21, with the card's