Loading A Paper Roll In Device - VeriFone T650p Installation Manual

D S
EVICE ETUP

Loading a Paper Roll in Device

To Connect the
Terminal Power
Supply
TIP
Loading a Paper
Roll in Device
NOTE
CAUTION
20
T650 I
P NSTALLATION
Insert the USB-C to the T650p and USB-A port to the power supply or Desktop.
USB C
Figure 9 T650p Power Supply Connection
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.
Install a paper roll before you can start transactions that require a receipt.
The T650p uses a roll of 58 mm x 40 mm, single-ply, thermal-sensitive paper.
A pink out-of-paper indicator line appears on the edge of the paper before the
end of the roll. After this line appears, there is enough paper remaining on the roll
to perform at least one more transaction.
A message is always displayed to indicate that the printer is out of paper.
Poor-quality paper can jam the printer and create excessive paper dust. To place
order for high-quality Verifone paper, refer to
Store thermal paper in a dry, dark area. Handle thermal paper carefully: impact,
friction, temperature, humidity, and oils affect the color and storage
characteristics of the paper.
Never load a roll of paper with folds, wrinkles, tears, or holes at the edges.
G
UIDE
USB-A
Accessories and Documentation.
USB-A