D
5500/5503 R
RYSTAR
EFERENCE MANUAL
Changing the Domain name
Perform steps 1 to 2 of the
1
page 70.
On the 'Change setting' screen, press the Down key three times, followed by the
2
Confirm key to select 'Network Dicom'.
The 'Network Dicom' screen is displayed:
On the 'Network-Dicom' screen, press the Down key twice, followed by the
3
Confirm key to select 'Domain name'.
The 'Domain name' screen is displayed:
If the domain name has already been assigned, it will be shown on the display.
Enter the domain name by means of the arrow keys. Refer to
4
page 33.
Entries are case sensitive.
Press the Confirm key to store the data, or the Escape key to quit the procedure
5
without any changes.
80
Advanced operation (Key-operator mode)
'Accessing the Change settings menu'
procedure on
'Data entry'
on
2900H EN 20071108