Changing The Netmask - AGFA Drystar 5500 Reference Manual

Changing the Netmask

Perform steps 1 to 2 of the
1
page 70.
On the 'Change setting' screen, press the Down key three times, followed by the
2
Confirm key to select 'Network Dicom'.
The 'Network Dicom' screen is displayed:
On the 'Network-Dicom' screen, press the Down key four times, followed by the
3
Confirm key to select 'Netmask'.
The 'Netmask' screen is displayed:
If the Netmask has already been assigned, it will be shown on the display.
When no DHCP server is available and when the subnet mask of the printer has
never been set, the subnet mask will be set to the APIPA address 255.255.0.0.
Enter the Netmask by means of the arrow keys. Refer to
4
Note that blank spaces will not be filled in (see examples on the next page).
2900H EN 20071108
'Accessing the Change settings menu'
D 5500/5503 R
RYSTAR
procedure on
e.g. 255.255.252. 0
'Data entry' on page 33.
Advanced operation (Key-operator mode)
EFERENCE MANUAL
83