Changing The Film View - AGFA Drystar 5500 Reference Manual

Changing the input tray settings (upper / lower)

Changing the film view

In the procedure, we will assume that the film view for the upper input tray is to be
changed. The procedure for the lower input tray is identical.
Perform steps 1 and 2 of the
1
page 70 to select the 'Upper input tray' screen.
In the 'Upper input tray' screen, press the Down key twice, followed by the
2
Confirm key to select 'Film view'.
The 'Film view' screen is displayed:
1* Normal
2 Back
The current film view is indicated with an *.
Press the Up/Down arrow keys to select the desired film view.
3
Press the Confirm key to store the data, or the Escape key to quit the procedure
4
without any changes.
2900H EN 20071108
'Accessing the Change settings menu'
D 5500/5503 R
RYSTAR EFERENCE MANUAL
procedure on
Advanced operation (Key-operator mode)
77