Port Mirroring - D-Link DES-3250TG User Manual

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
available on the 1000BASE-T module. In addition, the fiber
port will always be the highest priority.
The following fields can be set:
Parameter
From and To
State <Enabled>
Speed/Duplex
<Auto>

Port Mirroring

To configure a port for port mirroring:
Click Port Mirroring on the Configuration menu:
Description
Enter the desired range of ports to be
configured in these fields.
Toggle the State field to either enable
or disable a given port.
Toggle the Speed/Duplex
either select
duplex/half-duplex state of the port.
Auto – auto-negotiation between 10
and 100 Mbps devices, full- or half-
duplex. The Auto setting allows the
port to automatically determine the
fastest settings the device the port is
connected to can handle, and then to
use those settings. The other options
are 100M/Full, 100M/Half, 10M/Full,
and 10M/Half. There is no automatic
adjustment of port settings with any
option other than Auto.
84
field to
the speed and