D-Link DES-3250TG User Manual page 186

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
Figure 6- 72. Rx Error Analysis window (table)
The following fields can be set:
Parameter
Time Interval [1s ]
Record Number
[200]
CrcError
UnderSize
Description
Select the desired setting between 1s
and 60s, where
seconds. The default value is one
second.
Select number of times the Switch
will be polled between 20 and 200.
The default value is 20.
Counts otherwise valid frames that
did not end on
boundary.
The number of frames detected that
are less than the minimum permitted
178
"s" stands for
a byte (octet)