Switch Ip Address - D-Link DES-3250TG User Manual

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
Make sure the terminal or PC you are using to make this
connection is configured to match these settings.
If you are having problems making this connection on a PC,
make sure the emulation is set to VT-100. If you still don't
see anything, try hitting <Ctrl> + r to refresh the screen.

Switch IP Address

Each Switch must be assigned its own IP Address, which is
used for communication with an SNMP network manager or
other TCP/IP application (for example BOOTP, TFTP). The
switch's default IP address is 10.90.90.90. You can change the
default Switch IP Address to meet the specification of your
networking address scheme.
The switch is also assigned a unique MAC address by the
factory. This MAC address cannot be changed, and can be
found from the initial boot console screen – shown below.
Figure 5- 1. Console Boot Screen
21