D-Link DES-3250TG User Manual page 171

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
SNMP User Table
Use the SNMP User Table to create a new SNMP user and add
the user to an existing SNMP group or to a newly created
group.
Figure 6- 61. SNMP User Table window
To delete an existing entry, click the selection button in the
Delete column on the far right that corresponds to the port you
want to configure. To create a new entry, click the Add button,
a separate window will appear.
Figure 6- 62. SNMP User Table Configuration window
163