D-Link DES-3250TG User Manual page 165

To display the current SNMP Group Table Configuration, click
the Group Name in the first column of the SNMP Group Table
window.
Figure 6- 56. SNMP Group Table Display window
The following parameters are used in the SNMP Group Table
windows:
Parameter
Group Name
Read View Name
Write View Name
Notify View Name
DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
Description
Type an alphanumeric string of up to
32 characters.
identify the new SNMP group of
SNMP users.
This name is used to specify the
SNMP group created can request
SNMP messages.
Specify a SNMP group name for
users that are allowed SNMP write
privileges to the
agent.
Specify a SNMP group name for
users that can receive SNMP trap
messages generated by the switch's
157
This is used to
switch's SNMP