D-Link DES-3250TG User Manual page 154

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
Initialize Port(s)
Existing 802.1x port settings are displayed and can be
configured using the window below.
Click Initialize Port(s) on the PAE Access Entity folder on
the Configuration menu to open the Initialize Port
window:
Figure 6- 46. Initialize Port window
This window allows you to initialize a port or group of ports.
The Initialize Port Table in the bottom half of the window
displays the current status of the port(s) once you have clicked
Apply.
This window displays the following information:
Parameter
Port
Authenticator − A user must pass the
authentication process
access to the network.
None − The port is not controlled by
the 802.1x functions.
Description
The port number.
146
to gain