D-Link DES-3250TG User Manual page 88

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
The following fields can be set:
Parameter
serial_port auto
logout time<Never>
MAC Address
Aging Time <300>
IGMP Snooping
<Disabled>
GVRP Status
<Disabled>
Telnet Status
<Disabled>
Web Status
<Disabled>
Link Aggregation
Algorithm <Mac
Source>
Description
Set the age out timer for the serial port
to 2 minutes, 5 minutes, 10 minutes, 15
minutes, or Never.
The MAC Address
specifies the length of time a learned
MAC Address will
forwarding table
accessed (that is, how long a learned
MAC Address is allowed to remain
idle). The Aging Time can be set to any
value between 10
seconds.
IGMP Snooping allows the switch to
read the Multicast Group IP address
and the corresponding MAC address
from IGMP packets that pass through
the switch. It can be enabled globally
by toggling Disabled to Enabled.
To enable GVRP on the switch globally,
toggle Disabled to Enabled.
The Switch can be accessed using
Telnet. Toggle Disabled to Enabled.
To enable the Web status, toggle
Disabled to Enabled.
The Link Aggregation Algorithm can be
set to one of the following: IP Src &
Dest, IP Destination, IP Source, Mac Src
& Dest, Mac Destination, or Mac Source.
80
Aging Time
remain in the
without being
and 1,000,000