D-Link DES-3250TG User Manual page 74

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
Figure 6- 3. User Account Modify Table window
1. Enter the new user name, assign an initial password,
and then confirm the new password. Determine whether
the new user should have Admin or User privileges.
2. Click Apply to make the user addition effective.
3. A listing of all user accounts and access levels is shown
in the User Account Management window. This list is
updated when Apply is executed. Click Show All User
Account Entries to access this window.
4. Please remember that Apply makes changes to the
switch configuration for the current session only. All
changes (including User additions or updates) must be
entered into non-volatile ram using the Save Changes
command on the Main Menu - if you want these
changes to be permanent.
Admin and User Privileges
There are two levels of user privileges: Admin and User. Some
menu selections available to users with Admin privileges may
not be available to those with User privileges.
66