Product Specifications; Before Using The Coffee System - Jenn-Air JBC7624BS Technical Education

Milk and Accessories Container:

BEFORE USING THE COFFEE SYSTEM

Coffee has been used to factory test the machine. It is completely
normal for there to be traces of coffee in the mill.
Customize water hardness as soon as possible. See "Water
Hardness" in the "Settings" section.
Voltage:
IMPORTANT: Complete the following steps before the coffee
system is used for the first time.
Power:
1. Check that the hot water spout is installed. If it is not, insert
Pressure:
the hot water spout into the hot water and steam nozzle.
Water Tank Capacity:
Dimensions:
Weight:
Temperature Probe:
Thermal Fuse (TCO):
Heating Element:
Pump:
Temperature Probe:
Thermal Fuse (TCO):
Heating Element:
A. Hot water and steam nozzle
B. Hot water spout
2. Turn on the coffee system.
3. The available languages will scroll automatically. Wait until
"Press OK to install ENGLISH" is displayed. Press and hold
OK.
Parts & Features (continued)
D
C
B
A
A. Milk intake tube
B. Frothed milk spout
C. Milk frother

Product Specifications

COFFEE SYSTEM SPECIFICATIONS
Coffee Section
A
B
Steam Section
E
G
F
D. Milk frother pointer
E. Clean button
F. Milk container handle
G. Hot water spout
4. After 5 seconds, "FILL TANK!" will be displayed. Remove the
water tank, rinse and fill to the MAX line with fresh water.
Replace the water tank.
120 VAC, 60 Hz
1350 W
218 psi (15 bar)
1.9 quarts (1.8 liters)
23.4 x 17.9 x 15.7 in (595 x 455 x 398 mm)
57 lb (26 kg)
208 °F (98 °C) Coffee/Hot Water
377 ° (192 °C)
600 + 600 W
ULKA-EAP5, 120VAC, 60Hz, 52W
5. "HOT WATER Press OK" will be displayed. Place a cup
underneath the hot water spout. Press OK. After a few
seconds, hot water will be dispensed.
293 °F (145 °C) Steam
604 °F (318 °C)
1000 W
Jenn-Air Built-in Coffee System
GENERAL INFORMATION
A
A. Water tank
A
A. Hot water spout
1-5
n