Complete Installation; Notes - Jenn-Air JBC7624BS Technical Education

INSTALLATION
10. Secure the power supply cord with the power supply cord
clip. Make sure there is enough slack in the power supply
cord to allow the coffee system to be pulled completely from
the cabinet in order to fill the coffee bean container.
WARNING WARNING
Electrical Shock Hazard Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Plug into a grounded 3 prong outlet.
Do not remove ground prong. Do not remove ground prong.
Do not use an adapter.
Do not use an adapter.
Do not use an extension cord.
Do not use an extension cord.
Failure to follow these instructions can result in death, Failure to follow these instructions can result in death,
fire, or electrical shock. fire, or electrical shock.
11. Plug the coffee system into a grounded 3-prong outlet.
12. Push the coffee system back into the housing.
13. Proceed to "Complete Installation" section.
n
3-6 Jenn-Air Built-in Coffee System

Complete Installation

1. Prepare your coffee system for use by following the directions
in "Before Using the Coffee System" in the Use and Care
Guide. Then test the coffee system by using one of the coffee
system functions.
2. If the coffee system does not operate:
Check that a household fuse has not blown, or a circuit
I
breaker tripped. Replace the fuse or reset the circuit
breaker. If the problem continues, call an electrician.
Check that the power supply cord is plugged into a
I
grounded 3 prong outlet.
See the Use and Care Guide for troubleshooting
I
information.
Installation is now complete.
Save these Installation Instructions for future use.
If you need Assistance or Service:
Please reference the "Assistance or Service" section of the Use
and Care Guide, or contact the dealer from whom you purchased
your coffee system.

Notes