Ma Level Settings; Fieldbus Settings; Relay Data - Honeywell XNX Technical Manual

XNX Universal Transmitter

mA Level Settings

Figure 180. mA Level Settings Screen
mA Level Settings shows the current values for mA output for
Inhibit, Warning, and Overrange output�
Figure 181. mA Output Inhibit, Warning and Overrange Screens.

Fieldbus Settings

Figure 182. Fieldbus Settings
Fieldbus Settings displays the current configuration of both
HART and Modbus� To change the settings see Fieldbus
Options� HART displays the current HART address assigned to
the transmitter�
Section 2 - Installation and Operation
Modbus displays the current address and communication data
rate assigned to the transmitter�
The Relay Menu is enabled only if the XNX transmitter is
equipped with the optional relays�
86
Figure 183. HART Configuration Settings
Figure 184. Modbus Configuration Display Screen

Relay Data

Figure 185. Relay Data Screen
Figure 186. Relay State Screens